What is SB? Learn how
This lesson boosts: SB building
Lesson goal
Learn what SB is and how SB's 5 methods differ, then complete SB once.
Where this lesson fits
FB→SB→CMLL→LSE
This lesson introduces SB's role in Roux and 5 common SB methods (build).
Main content
What is SB?
SB (Second Block) is the block at bottom right, the same shape as FB. It's made of 5 pieces (edges DR, FR, BR and corners DRF, DBR) plus the right center. To keep FB intact, it's built mostly with R, r, U and M.
- Build a block the same shape as FB at bottom right
How to approach SB
SB isn't memorized either. Except for advanced solvers aiming for the optimal, SB is basically built with only R, r, U, M moves (which keep FB intact), so there are fewer faces to use than in FB, and you can think in combinations of the same moves like R U R′. Watch where the SB pieces are while building FB, and you can keep going without pausing.
5 SB methods (build)
Here are 5 SB methods (build). From top to bottom, moves go down but there's more to watch.
| Basic steps | 13.1 moves | |
|---|---|---|
| Build a square | 11.1 moves | |
| Keep the square up, set up the next pair | 8.9 moves | |
| Use the M slice | 8.6 moves | |
| Break FB for optimal | 7.9 moves |
Basic steps
Best for: First-time SB builders
Build a block the same shape as FB at bottom right (SB), with R, r, U and M only so FB stays whole. ① insert DR, ② bring the corner and edge to the top, ③④ make a pair on top (2 ways by the corner's orientation), ⑤ insert the pair, repeating ② to ⑤ for the front and back pairs. No algorithms to memorize.
- Recommended for beginners
- Split into 4 steps, so it's always clear what to do
- No algorithms to memorize
- 2 moves more on average than building a square (13.1 vs. 11.1)
- Inserting DR first makes it a detour
- Put the middle edge (DR) in first. If it's under the M slice, turn the M slice to bring it up, take it to the top right with U, and put it in with R2
- Join the front corner and edge into a pair on the top (move the edge with the M slice to meet the corner)
- Put the pair into the front slot with R U′ R′
- The back corner and edge became a pair on the top while the front went in. U lines it up and R′ U R puts it in the back: SB done (12 moves)
Build a square
Best for: Used to the basic steps and want to drop the DR-first detour
Instead of inserting DR first, join DR with the corner and edge and insert them at once as a square. It works the same whether DR is on top or in a spot the right layer has turned away.
- Recommended once you're used to the basic steps
- No DR first: 2 moves fewer on average than the basic steps (11.1)
- You need to see how DR and the pair come together at once
- Don't put DR in first: bring DR and the back corner and edge together on the top
- Put DR and the back pair in at once, as a square (the front corner and edge became a pair on the top meanwhile)
- R U′ r′ puts the front pair in: done (10 moves)
Keep the square up, set up the next pair
Best for: Used to building a square, and want to cut further
Once the square is made, don't return it to the bottom: leave it turned with the right layer, set up the next pair with U or M, and return everything at the end. It's harder because you have to track the right layer.
- Recommended once you're used to building a square
- Return the square and set up the next pair at the same time
- 2.2 moves fewer on average than making the square (8.9; about the same as the R, r, U, M-only optimal of 8.6)
- You need to track in your head that the right layer is still turned
- DR and the back corner and edge meet on the top, making the square with the right layer turned (the same as the square way so far)
- Without putting the square down, line up the front corner and edge (one move fewer than putting it down first)
- With the last move, the square and the front pair go in together: done (9 moves)
Use the M slice
Best for: Want near-optimal builds using M, not just R and U
Build SB with M, not just R and U. For example, when an SB edge is in the M slice (top or bottom, front or back), move it with M to meet its corner. Fewer rotations; just R, U and M.
- Recommended once you're used to the basic steps
- Without breaking FB, only 0.7 moves from the optimal using F and B (8.6 vs. 7.9 on average)
- Only R, U and M, so fewer rotations
- You need to track the edges and centers that M moves
- When DR is under the M slice, M brings it up, take it to the top right and put it in with R2. The centers are left turned
- The M-slice part of r lifts the edge under the M slice up beside its corner. The turned centers come back too
- Once the front square is made, put it in together with the back pair: done (9 moves; 10 without M)
Break FB for optimal
Best for: Advanced solvers chasing optimal
Build SB in the fewest moves, even breaking FB temporarily with moves like F or B (e.g. open FB's front with F, make the square, put it back with F), then restore FB right away. It's 0.7 moves shorter on average than the R, r, U, M-only optimal, and helps in half of positions. An advanced method for those chasing optimal, shaving off less than one move.
- Recommended for advanced solvers chasing optimal
- In half of positions, shorter than the R, r, U, M-only optimal
- Saves only 0.7 moves on average, less than 1
- You need to manage restoring the broken FB
- Bring DR up to the top layer
- F breaks the front of FB for a moment; use the space to make the front square
- F puts FB back, and the square goes in together with the back pair: done (8 moves; the optimal keeping FB is 9)
First, try to build it once
For first-timers we recommend “Basic steps”. If unsure, just build it with “Basic steps”. Use “Practice on cube” below the animation to turn your own cube the same way. Once comfortable, tap “Start” below and complete SB once in the Timer.