Build FB “Square-first”
This lesson boosts: FB building
Lesson goal
The goal is to be able to build FB with “Square-first”.
Where this lesson fits
The way to learn after Bottom-line first. On average it takes about the same moves (8.2 and 8.1), but in some cases one of them is much shorter. Once you can build Square-first too, you can move on to “Bottom-line or Square”, choosing the shorter one.
- Recommended once you're used to Bottom-line first
- When a corner and the edge beside it are already a pair, it tends to be shorter than Bottom-line first
- Start from whichever square, front or back, is quicker
- You need to spot the 3 pieces of a square during inspection
- When the square is hard to make, it takes more moves than Bottom-line first
| 下段先行 | 8.1 moves | |
|---|---|---|
| 正方形型 | 8.2 moves | |
| Bottom-line or Square | 7.6 moves |
The step before this method. Start here if you haven't yet.
If you're interested in methods with fewer moves, check these out too.
Main content
First build the bottom-left square (2 edges and a corner), then insert the remaining pair. Pick whichever side, front or back, is quicker.
How to recognize
- A square is the 2×2 shape made of 3 pieces: the DL edge plus the front (or back) corner and edge. The front square is DL, FL, DFL; the back square is DL, BL, DLB.
- During inspection, check how many moves each square, front and back, would take. Build the shorter one.
- How to build: join 2 of the 3 first (the corner-edge pair, or DL and the corner), then bring in the third with the last move. You can also insert DL and then the pair.
- Once the square is done, insert the remaining pair. If you built the front square, insert the back pair with U, B, R; if you built the back, insert the front pair with U, F, R. These moves don't break the square.
Algorithm
- Build a 2×2 square at bottom left from DL plus the front or back edge and corner (pick the quicker one)
- Pair up the remaining corner and edge on top
- Insert the pair next to the square to finish
RF2RBU'B2(6 moves)
- Make the square (DL, FL, DFL)
- Insert the back pair without breaking the square to finish FB