FBLv.3Sub-60 s

Get the FB to 9 moves on average with “Bottom-line or Square”

This lesson boosts: FB building

Lesson goal

The goal is to be able to build FB with “Bottom-line or Square”.

Where this lesson fits

The finishing way for the FB. Once you can build both Bottom-line first and Square-first, compare them during inspection and choose the shorter. Reading to the end of the FB, it averages 7.6 moves, about 0.5 fewer than either alone (8.1 and 8.2). Comparing only the first part still gives 8.0.

  • Recommended once you are used to Bottom-line first and Square-first
  • You choose the shorter one for each case, so 0.5 moves fewer on average than either alone (7.6)
  • You have to compare the two ways during inspection and choose
  • To make it shortest you have to count both to the end of the FB (comparing only the first part: 8.0 on average)
Reference: average moves per FB method
下段先行8.1 moves
正方形型8.2 moves
Bottom-line or Square7.6 moves

The step before this method. Start here if you haven't yet.

Main content

During inspection, compare whether the bottom line (the three bottom pieces in a line) or a square comes together sooner, and build the shorter one. Choosing for each case makes it 0.5 moves shorter on average than either alone.

How to recognize

  • During inspection, count how many moves the three bottom pieces (DL and the corners beside it) take to form a line, and how many the front and back squares take. The line can form anywhere; where it forms counts as the bottom.
  • At first (comparing the first part): if the line takes as many moves as the square or fewer, build Bottom-line first; if the square takes fewer, build Square-first. That averages 8.0 moves (either alone: 8.1 and 8.2) and picks the shorter way in 73% of cases.
  • Once used to it (reading to the end of the FB): count both to the end of the FB and choose the shorter. That brings it down to 7.6 on average.
  • Clues when unsure: if a corner and the edge beside it (DFL and FL, or DLB and BL) are already a pair, Square-first tends to be shorter (Square-first shorter in 54% of such cases, Bottom-line first in 22%); if the two corners (DFL and DLB) are already side by side, Bottom-line first tends to be shorter (54% and 22%).

Algorithm

  1. During inspection, count how many moves the three bottom pieces take to form a line and how many the front and back squares take (once used to it, count both to the end of the FB)
  2. Build the shorter one (Bottom-line first shorter in about 4 cases in 10, Square-first in about 3, the same in about 3)
  3. With the line, add the rest without breaking it; with a square, put in the remaining pair to finish

A case where Bottom-line first is shorter

MF'B2D(4 moves)
  1. Compare in inspection: count the moves until the three bottom pieces form a row and until a square forms, and build the shorter way (here the row takes 1, the square 7, so bottom-line first)
  2. With moves that keep the row, put one of the middle edges in front of the left center
  3. Turning the row down, put the other middle edge behind the left center
  4. Join the row at the bottom left: FB done (4 moves; 7 from a square)

A case where Square-first is shorter

R'D2F2(3 moves)
  1. Compare in inspection: when a corner and edge are already a pair, starting from the square is often shorter (here the square takes 3, the row 7). First build the back square
  2. Join the front pair to the square: FB done (3 moves; 7 from the bottom line)